Hydraulic Cylinders

Groundforce single acting hydraulic cylinders are manufactured from high strength aluminium alloy. The cylinders are operated by a single acting hydraulic hand pump and are fitted with a safety bleed-off valve to prevent over extension.

Add to Basket

Added to Enquiry Basket

Cylinder Model Ref.	Width of each Cylinder	Working Range	Weight of each Cylinder
Model 22	100mm (4”)	360mm (14") – 540mm (21")	4.0kg
Model 27	100mm (4”)	440mm (17") – 700mm (27.5")	4.5kg
Model 36	100mm (4”)	540mm (21") – 905mm (35.5")	5.8kg
Model 46	100mm (4”)	695mm (27") – 1160mm (45.5")	6.8kg
Model 55	100mm (4”)	850mm (33.5") – 1390mm (54.5")	8kg

FAQs

Gravshore - Groundforce ToolBox Talks Video

This Groundforce Toolbox talks video guides you through the Gravshore sector of Groundforce. Specialising in the shoring of graves, this video shows the assembly, installation and dismantling of the Gravshore equipment.

Enquire Now

Related Products

Coffin Shaped Units

The standard coffin shaped unit uses model 22 cylinders.If you would like to understand how to safely utilise Gravshore systems in graveyards, we provide Grave Shoring Training.

End Support Units

Gravshore End Support Units consists of support posts and either aluminium trench sheets or panels. Gravshore end support units are available to provide extra cover at both ends of the excavation. The unit simply consists of a support post and end panel or aluminium trench sheet.

Rectangular Units

The standard rectangular unit uses model 36 cylinders, and ranges in overall length from 1525mm (5') to 2440mm (8')If you would like to understand how to safely utilise Gravshore systems in graveyards, we provide Grave Shoring Training.

Tapered Units

The standard tapered unit uses one model 22 cylinder, and one model 36 cylinder as shown on the illustration.If you would like to understand how to safely utilise Gravshore systems in graveyards, we provide Grave Shoring Training.