0800 000 345
The standard coffin shaped unit uses model 22 cylinders.
If you would like to understand how to safely utilise Gravshore systems in graveyards, we provide Grave Shoring Training.
Added to Enquiry Basket
Unit Length
Internal Clearance
Unit Depth
Weight of each panel (kg)
Unit Weight - When using 2 model 22 cylinders (kg)
2135mm (7'0")
1935mm (6'5")
285mm (1'0)
16
40
435mm (1'6")
20
48
585mm (2'0")
27
62
2288mm (7'6")
2088mm (6'10")
285mm (1'0")
18
44
22
52
31
70
Note: The imperial figures stated above are approximate nominal measurements
This Groundforce Toolbox talks video guides you through the Gravshore sector of Groundforce. Specialising in the shoring of graves, this video shows the assembly, installation and dismantling of the Gravshore equipment.
Gravshore End Support Units consists of support posts and either aluminium trench sheets or panels. Gravshore end support units are available to provide extra cover at both ends of the excavation. The unit simply consists of a support post and end panel or aluminium trench sheet.
The standard rectangular unit uses model 36 cylinders, and ranges in overall length from 1525mm (5') to 2440mm (8')If you would like to understand how to safely utilise Gravshore systems in graveyards, we provide Grave Shoring Training.
The standard tapered unit uses one model 22 cylinder, and one model 36 cylinder as shown on the illustration.If you would like to understand how to safely utilise Gravshore systems in graveyards, we provide Grave Shoring Training.
When there is potential water ingress into the excavation or grave we can supply motorised water pumps complete with suction hoses.