Driving Caps

Driving Caps are specifically designed to aid the installation of trench sheets. They are simple to fit and use and act as a protective shield which vastly reduces end damage to trench sheets while improving the driving process. Caps are available in two sizes to cover the range of Groundforce trench sheets.

Improves drivability
Significantly reduces end damage
Simple to fit and use
Two caps fit all Groundforce sheets

Add to Basket

Added to Enquiry Basket

Piling Cap	Trench Sheet	Weight (kg)
Standard Cap	Standard Lap Sheets KD4 Sheets	10
Multi Purpose Driving Cap	HY6 KD6 L40	20

FAQs

Related Files

(467.39 KB)

Driving Caps User Guide

Related Products

Trench Sheet (Standard)

Groundforce Shorco offer a comprehensive range of cold formed lapped trench sheets and interlocking light pile sections to provide a cost effective solution for most excavation support applications. Many of the sections are produced from high yield steel which provides an exceptional strength-to-weight ratio resulting excellent durability whilst driving and resistance to on-site damage.

Piling Hammer (EMV)

Piling Hammers (EMVs) are specifically designed as a sheet piling attachment for excavators. They have a high power to weight ratio due to the high operating frequency and can apply an additional vertical force from the excavator to assist driving if required. This type of excavator mounted sheet pile driver is ideally suited to cohesive, granular soil conditions and can significantly decrease driving time, reduce noise and minimise potentially hazardous vibrations.

Side Grip Piling Hammer

The Side Grip Piling Hammer is an excavator-mounted vibratory pile hammer that can hold the pile or tube from the side and drive/pull the pile from this profile, meaning they are ideal when working in limited heights. The greatest advantage of the Side Grip Piling Hammer is that sheet piles can be used that are much longer than the reach of the excavator boom, meaning you can install and remove long sheet piles using your own excavator.

Impact Hammer

The DX20 Excavator-Mounted Impact Hammer is designed for driving Sheet Piles and Steel Tubes. Fitted with a Tilt/Rotator and Quick Hitch Adapter for optimum manoeuvrability when connected to a suitable excavator. When connected to the excavators Quick Hitch, the hammer can be quickly lifted from a horizontal transport position to a vertical position. Side tilt adjustment of five degrees left and right allows the hammer to cope with site conditions.