Vetter Inflatable 1.5 Bar

Whether you need to carry out air testing, water testing, flow stopping, fluming or over-pumping, Vetter expandable cylindrical stoppers are an effective and convenient solution.

Diameter ranges 100mm-1400mm
Durable and expandable
Can withstand maximum back-pressure of 0.5 bar or 5 meters head of water
Large sealing range allows remote inflation
Maximum working pressure 1.5 bar
May also be manufactured in chloroprene rubber for high resistance against chemicals

Add to Basket

Added to Enquiry Basket

Blank 1.5	100/200	200/400	350/600	500/1000	600/1200	800/1400
Range (mm)	100-200	200-400	350-600	500-1000	600-1200	800-1400
Working Pressure (bar)	1.5	1.5	1.5	1.5	1.5	1.0
Diameter (mm)	90	195	295	450	580	785
Length (mm)	510	650	735	1110	1320	1810
Weight (kg)	1.2	4	7	17	25	41

Bypass 1.5	100/200	200/500	200/500	300/600	300/600	300/600	500/1200
Range (mm)	100-200	200-500	200-500	300-600	300-600	300-600	500-1200
Working Pressure (bar)	1.5	1.5	1.5	1.5	1.5	1.5	1.5
Diameter (mm)	95	195	195	290	290	290	480
Bauer (Inch)	3	4	6	4	6	8	6
Weight (kg)	7	13	14	26	32	33	59

FAQs

Related Files

(79.78 KB)

Vetter 1.5 Bar Inflatable Stopper User Guide

(115.48 KB)

Vetter 1.5 Bar Inflation Controller User Guide

(79.34 KB)

Vetter 1 Bar Inflatable Stopper User Guide

(112.61 KB)

Vetter 1 Bar Inflation Controller User Guide

Related Products

Vetter Inflatable 2.5 Bar

Available as blank or test plugs, the oil and acid resistant rubber protects against aggressive fluids.Stoppers must be fully inserted into the pipe prior to inflation and must not be used in pipework within open excavations or unrestrained pipework. All pipes must be anchored before pressure testing

Blank Cone Pipe Stopper

Different in construction to a conventional cylindrical inflatable stopper, the Cone Pipe Stopper is far more versatile.

Bypass Cone Pipe Stopper

The Bypass Cone Pipe Stopper is ideal for when stopping the flow is not possible in a pipe, drain or sewer. This durable bypass stopper allows you to drain off the water through a PVC type pipe used in the middle of the stopper.

High Pressure Pipe Stoppers

If the standard sealing pipe can not be used due to high back pressure, then these high pressure pipe stoppers are recommended.Higher operational pressure is ensured by the special Kevlar reinforcement used in all the stoppers. The diameter of the standard product line ranges from 50mm - 600mm.Stoppers must be fully inserted into the pipe prior to inflation and must not be used in pipework within open excavations or unrestrained pipework. All pipes must be anchored before pressure testing.