Impact Hammer Hire

The DX20 Excavator-Mounted Impact Hammer is designed for driving Sheet Piles and Steel Tubes. Fitted with a Tilt/Rotator and Quick Hitch Adapter for optimum manoeuvrability when connected to a suitable excavator. When connected to the excavators Quick Hitch, the hammer can be quickly lifted from a horizontal transport position to a vertical position. Side tilt adjustment of five degrees left and right allows the hammer to cope with site conditions.

Total control of hammer
Allows precise matching of energy to suit the pile driving requirements
Double acting cylinder produces high impact energy and fast blow rate
Economical - Low hydraulic power requirements
The hammer can be operated directly from the excavator

Add to Basket

Added to Enquiry Basket

New Piling Solutions

Take a look at Piletec's new piling solution! The ICE Side-Grip Hammer by Dieseko Group, and DX20 Excavator-Mounted Impact Hammer are designed to safely drive long sheet piles and steel tubes, and when used together they are capable of installing sheet piles up to 16m long.

Enquire Now


Ram Weight (kg)	1500
Hammer Energy (kN.m)	20
Maximum Pile Size (mm)	800
Drop Weight Mass (kg)	1500
Blow Rate at Rated Energy (bpm)	60
Operating Pressure (bar)	150
Hydraulic Oil Flow Required (L/min)	150
Operating Mode	PR / EM
Pile Type	SP / TH / CP / WP
Power Source	PTO
Hammer Width (mm)	600
Hammer Weight (kg)	5500

FAQs

Related Files

(3.31 MB)

Excavator Mounted Impact Hammer

The Side Grip Piling Hammer is an excavator-mounted vibratory pile hammer that can hold the pile or tube from the side and drive/pull the pile from this profile, meaning they are ideal when working in limited heights. The greatest advantage of the Side Grip Piling Hammer is that sheet piles can be used that are much longer than the reach of the excavator boom, meaning you can install and remove long sheet piles using your own excavator.

Larssen Sheet Piles

Larssen Piles are a type of sheet piling that has an interlocking section which forms a sheet piling retaining wall. Each sheet pile section is connected at 180 degrees from the previous one to form a uniform wall with alternating troughs and peaks. Larssen Sheet Piles are typically used in temporary or permanent cofferdams, retaining walls and foundation construction.

V901 Vibration Monitor

The V901 is battery powered portable vibration monitoring equipment, purpose designed for ground vibration monitoring of blasting, piling, demolition, construction and traffic vibrations.