Multi-Bar Pile Cropper Hire

Select Product Size

Please select

6t Square Multi-Bar Cropper 200-300mm

6t Square Multi-Bar Cropper 275-350mm

6t Square Multi-Bar Cropper 250-300mm

6t Square Multi-Bar Cropper 200-250mm

The Multi-Bar Cropper also known as the square concrete cropper, is the chosen piece of equipment when cutting square pre-cast piles with up to eight rebar. The cropper is lowered over the pile in 300m increments until finished level is achieved. Square multi-bar croppers are easy to operate for cutting different size square pile sizes on site. Up to 200 piles can be processed per day, leaving the reinforcement intact with no cracks below the cut-off level.

Four models available
The breaking process is many times faster than conventional breaking and is fully controlled throughout the operation
Engineer delivers and fits the square cropper to the excavator
A suitable powerpack can be advised and supplied if required
Special square croppers available for non-standard piles

Add to Basket

Added to Enquiry Basket

Pile Size (mm)	200/300	300/350
Machine Carrier Class (tonne)	6/13	6/13
Oil Flow L/Min	40/80	40/80
Operating Oil Pressure Max (bar)	210	210
Height (mm)	400	400
Width (mm)	1300	1400
Length (mm)	1300	1400
Weight (kg)	450	500

FAQs

Related Files

(2.24 MB)

Range of Pile Croppers

The 4 Jaw Pile Cropper is an efficient and versatile tool for cutting cast in-situ, contiguous, and secant concrete piles ranging from 300mm to 1200mm, while leaving the rebar intact. It's easy to install and operate, utilizing an excavator's in-board hydraulics for a smooth and reliable cutting process. This user-friendly tool is optimal for pile-cutting due to its efficient cutting capabilities and versatile design.

CFA Cropper

The fast, safe method of reducing cast in-situ, circular, concrete piles. The CFA Cropper will cut circular concrete piles from 300mm diameter and upwards of 1200mm. It’s modular design allows it to be adjusted to suit different pile sizes on site. Using the CFA pile cropper, an average 300mm circular pile can be reduced to your required level in as little as 3 minutes, compared to an average 45 minutes when manually cut using hammers and breakers.

CHD Cropper

The CHD Cropper has been especially designed to suit CHD or ‘corkscrew’ piles, but can in some cases be used for contiguous or secant piles. This unique cropper has the power and strength to remove the outside fins of the pile whilst leaving the rebar unhurt. This cropper is very powerful and has the weight to match, therefore we recommend a minimum 16 tonne excavator to carry and power this machine safely.

Motocut

The Motocut pile cutter offers the latest in cutting technology, replacing traditional manual work and improving job safety. The hydraulic driven Motocut is ideal for a range of square concrete piles and performs up to 5 times faster when compared to manual cutting. The machine is also easy to transport to a worksite and can be easily attached to an excavator, ensuring maximum efficiency. The Motocut eliminates the risk of cut piles falling on operators and speeds up site schedule.