Side Grip Piling Hammer Hire

The Side Grip Piling Hammer is an excavator-mounted vibratory pile hammer that can hold the pile or tube from the side and drive/pull the pile from this profile, meaning they are ideal when working in limited heights. The greatest advantage of the Side Grip Piling Hammer is that sheet piles can be used that are much longer than the reach of the excavator boom, meaning you can install and remove long sheet piles using your own excavator.

Can pick up and install sheet piles up to 16m long
Unique linear side-clamping system resulting in a more efficient clamping load transfer
Exchanging clamp claw configuration without changing the clamp arms for gripping sheet piles, casings up to ø 550 mm and H-beams up to H500. Unlimited 360° rotary head
The unique, multi-directional elastomers create a more stable and predictable movement of the dynamic part of the Side Grip Hammer

Add to Basket

Added to Enquiry Basket


Eccentric moment	8 kgm
Max. frequency	2300 rpm
Max. operating pressure	350 bar
Max. oil flow	214 l/min
Dynamic weight incl. clamp	2576 kg
Total weight excl. 60TU + tilting adapter	3300 kg
Max. centrifugal force	464 kN
L x W x H (incl 60TU + tilting adaptor)	1416 x 1663 x 2580 m

FAQs

Related Files

(3.63 MB)

Side Grip Vibratory Hammer User Guide

New Piling Solutions

Take a look at Piletec's new piling solution! The ICE Side-Grip Hammer by Dieseko Group, and DX20 Excavator-Mounted Impact Hammer are designed to safely drive long sheet piles and steel tubes, and when used together they are capable of installing sheet piles up to 16m long.

Enquire Now

The DX20 Excavator-Mounted Impact Hammer is designed for driving Sheet Piles and Steel Tubes. Fitted with a Tilt/Rotator and Quick Hitch Adapter for optimum manoeuvrability when connected to a suitable excavator. When connected to the excavators Quick Hitch, the hammer can be quickly lifted from a horizontal transport position to a vertical position. Side tilt adjustment of five degrees left and right allows the hammer to cope with site conditions.

Piling Hammer (EMV)

Piling Hammers (EMVs) are specifically designed as a sheet piling attachment for excavators. They have a high power to weight ratio due to the high operating frequency and can apply an additional vertical force from the excavator to assist driving if required. This type of excavator mounted sheet pile driver is ideally suited to cohesive, granular soil conditions and can significantly decrease driving time, reduce noise and minimise potentially hazardous vibrations.

Larssen Sheet Piles

Larssen Piles are a type of sheet piling that has an interlocking section which forms a sheet piling retaining wall. Each sheet pile section is connected at 180 degrees from the previous one to form a uniform wall with alternating troughs and peaks. Larssen Sheet Piles are typically used in temporary or permanent cofferdams, retaining walls and foundation construction.

Mega Brace

The Mega Brace is a high load capacity modular hydraulic bracing system designed to support square, rectangular or multi-sided excavations ranging from 3.0m to 20.0m in plan.