Piling Hammer (EMV)

Select Product Size

Please select

Excavator Mounted Vibrator 13t - 16t Excavator

Excavator Mounted Vibrator 13t - 20t Excavator

Excavator Mounted Vibrator 13t - 16t Excavator

Excavator Mounted Vibrator 20t - 30t Excavator

Excavator Mounted Vibrator 25 - 35t Excavator

Excavator Mounted Vibrator 25t - 40t Excavator

Excavator Mounted Vibrator 20t - 30t Excavator

Excavator Mounted Vibrator 25 - 35t Excavator

Excavator Mounted Vibrator 5t - 8t Excavator

Excavator Mounted Vibrator 13t - 20t Excavator

Excavator Mounted Vibrator 20t - 30t Excavator

Excavator Mounted Vibrator 13t - 20t Excavator

Excavator Mounted Vibrator 5t - 10t Excavator

Excavator Mounted Vibrator 13t - 22t Excavator

Excavator Mounted Vibrator 25t - 35t Excavator

Piling Hammers (EMVs) are specifically designed as a sheet piling attachment for excavators. They have a high power to weight ratio due to the high operating frequency and can apply an additional vertical force from the excavator to assist driving if required. This type of excavator mounted sheet pile driver is ideally suited to cohesive, granular soil conditions and can significantly decrease driving time, reduce noise and minimise potentially hazardous vibrations.

A key benefit of choosing the Piletec excavator mounted sheet pile driver is the option to mount it via the VibroSafe Quick Hitch Adaptor. This purpose designed adaptor enables the piling hammer to be used with a fully automatic quick hitch coupler – a key safety feature, as no operator intervention is necessary. Of course, the EMV may also be mounted via a bracket directly to the dipper arm in the traditional way.
The EMV is of a slim design to enable it to drive between adjacent upstanding piles. If required however, the clamp can be removed and refitted at 90 degrees, enabling piling to be carried out close to an existing structure.
In special circumstances, this range of excavator pile driver attachment can easily be operated from a Piletec Powerpack.

Add to Basket

Added to Enquiry Basket

Model	MS1 HFB	MS3 HFB	MS4 HFB
Weight (kg)	350	830	1230
Max. centrifugal force (kN)	90	296	374
Eccentric moment (kgm)	0.7	3	4.2
Max. oil flow (l/min)	102	120	171
Max. working pressure (bar)	300	300	300

	230M (B)	328M (B)	428M (B)	625M (B)	823b	E5 FM	E7 FM
Eccentric moment (kgm)	2.2	3.2	4	6	8	4.6	6.6
Max. centrifugal force (kN)	220	275	345	410	464	395	452
Max. frequency (rpm)	3000	2800	2800	2300 (2500)	2300	2800	2500
Max. amplitude (incl univ damp) (mm)	7 (6)	9.5 (8.5)	10 (9)	14.5 (13)	19.1	10	16
Max. static line pull (kN)	100	100	120	120	120	120	120
Dynamic weight (incl univ damp) (kg)	640 (720)	660 (740)	795 (900)	825 (930)	940	700	705
Total weight (incl univ clamp) (kg)	875 (1080)	885 (1090)	1065 (1280)	1095 (1300)	1310	1495	1515
Height A (excluding bracket) (mm)	1095 (1320)	1095 (1320)	1145 (1388)	1145 (1388)	1115	1378	1379
Width B (mm)	575 (530)	575 (530)	710 (612)	710 (612)	612	725	767
Length C (mm)	1230 (1115)	1230 (1115)	1300 (1115)	1300 (1115)	1003	1380	1380
Depth D (mm)	258	258	300	300	385	344	344
Power Pack	ICE 100	ICE 100	ICE 180RF	ICE 180RF	ICE 330RF	N/A	N/A

FAQs

Related Files

(3.66 MB)

Excavator Mounted Vibrators (EMVs) User Guide

(1.05 MB)

Free Suspended Vibrators (FSVs) User Guide

The Gooseneck Extension is used to extend the vibrator’s height and reach and is simply mounted on the jib of the excavator. This facility is particularly useful for driving longer piles in soft ground conditions where there is a need to reach over and down embankments or to clear obstructions etc. As well being compatible with the hammer models listed in the table above, the Gooseneck can also be used with the more powerful E5FM and E7FM Excavator Mounted Vibrators.

VibroSafe Quick Hitch Adaptor

The Piletec VibroSafe Quick Hitch Adaptor is a specially developed piece of equipment that is exclusive to Piletec. The VibroSafe connects Excavator Mounted Vibratory Hammers via the excavator’s quick hitch system. The adaptor comes pre-assembled; eliminating the need for the fitting or removal of bolts and pins. The VibroSafe can be used with 90% of all quick hitch systems from 12–25 tonne excavators.

Larssen Sheet Piles

Larssen Piles are a type of sheet piling that has an interlocking section which forms a sheet piling retaining wall. Each sheet pile section is connected at 180 degrees from the previous one to form a uniform wall with alternating troughs and peaks. Larssen Sheet Piles are typically used in temporary or permanent cofferdams, retaining walls and foundation construction.

V901 Vibration Monitor

The V901 is battery powered portable vibration monitoring equipment, purpose designed for ground vibration monitoring of blasting, piling, demolition, construction and traffic vibrations.

Piling Hammer (EMV)

FAQs

Related Files

You May Also Like

Gooseneck Extension

VibroSafe Quick Hitch Adaptor

Larssen Sheet Piles

V901 Vibration Monitor